|
| |
|
|
Observation of educational control framework in Björnson park in Brno
Andraško, Matúš ; Vondrák, Jiří (referee) ; Machotka, Radovan (advisor)
The bachelor work deals with control framework, which was made for education and training students VUT faculty of civil engineering in Brno. This point field was surveying by GNSS method, which was enough for its purpose. Our task was specify this control framework by combination of terestric and satellite methods. Documentation of this task involves tables of coordinates in positional system S-JTSK and altitudes in system Bpv and geodetic sketch of control framework.
|
|
|
Metric survey documentation of historic building in the area of Veveří castle
Velecká, Kateřina ; Volařík, Tomáš (referee) ; Machotka, Radovan (advisor)
The diploma thesis deals with the production of metric survey documentation of part of historic building in the area of Veveří castle, namely two buildings located on the so-called "Příhrádek" in the form of a ground plan and section in the scale of 1:50 and elevations in the scale of 1:100. The thesis contains a theoretical part describing methods of surveying monuments, their outcomes and used software. And a practical part that deals with the measurement itself and the following procession leading to the production of graphical outcomes.
|
|
|
Thematical map creation in locality V zrcadlech - southern part
Chalupková, Klára ; Weigel, Josef (referee) ; Kratochvíl, Radim (advisor)
The intention of the bachelor’s thesis is geodetic survey of former mining sites V zrcadlech and creation thematic map of area of interest at a scale of 1:500 and according to ČSN 01 3410 Maps of large scales. Base and thematical maps. The first part of the thesis deals with the preparation and surveying of the site. The second part deals with the office work, both data processing, as well as creation of the thematic maps. There was built survey net of auxiliary survey points on the site, which was determined by polygonal traverse and three-tripod equipment system using a total station. Connection of the traverse was carried out on horizontal control and points measured using GNSS. Points of detailed survey were measured from auxiliary survey points. The computational work was made in software Groma v. 7.0 and the graphic work was made in software MicroStation PowerDraft V8i and Atlas DMT.
|
|
|
Metric survey documentation of historic building in the area of Veveří castle
Velecká, Kateřina ; Volařík, Tomáš (referee) ; Machotka, Radovan (advisor)
The diploma thesis deals with the production of metric survey documentation of part of historic building in the area of Veveří castle, namely two buildings located on the so-called "Příhrádek" in the form of a ground plan and section in the scale of 1:50 and elevations in the scale of 1:100. The thesis contains a theoretical part describing methods of surveying monuments, their outcomes and used software. And a practical part that deals with the measurement itself and the following procession leading to the production of graphical outcomes.
|
|
|
Style of locators - differences in triangulation
Loits, André ; Drdácký, Tomáš ; Buzek, Jaroslav ; Zadražil, Tomáš
The vast majority of contemporary European cities have their origins in the Middle Ages. ln our territory, most towns were founded from the beginning of the 12th century to the middle of the 14th century during the reign of the last Přemyslids. Urban city layouts are original, and although it is difficult to visually compare them at first glance, their apparent diversity shows certain rules and systems. This finding was verified by an analysis of 29 Czech and Moravian cities. The paper presents the results of the analysis of selected cities. The locator, commissioned by the then investor to organize the settlement of the new location, played a crucial role in the founding of the towns. Due to the number and close sequence of founded cities, it is probable that the cities were measured by experienced surveyors, with theoretical and practical knowledge of geometry. The complexity of the task, as well as the proven fact that a large number of cities have emerged over several decades, leads to the conclusion that there was a proven, somewhat routine approach to the site, which ensured certainty in the survey and the birth of a functioning city. The paper presents identified types of procedures for surveying the city layout in two modes of triangulation and corresponding four systems of initial base stations, from which the city and its boarder was delineated. The work loosely follows the text Triangulated medieval cities, published at the conference Architecture in Perspective in 2017 and summarizes the results of four years of research work.
|
|
| |
|
|
Observation of educational control framework in Björnson park in Brno
Andraško, Matúš ; Vondrák, Jiří (referee) ; Machotka, Radovan (advisor)
The bachelor work deals with control framework, which was made for education and training students VUT faculty of civil engineering in Brno. This point field was surveying by GNSS method, which was enough for its purpose. Our task was specify this control framework by combination of terestric and satellite methods. Documentation of this task involves tables of coordinates in positional system S-JTSK and altitudes in system Bpv and geodetic sketch of control framework.
|
|
|
Využití sítě CZEPOS pro tvorbu účelové mapy jako podkladu k rozšíření parku Smetanovy sady ve Vyškově
Sedláček, Jiří
This thesis is dealing with scientific/technic discipline, more specifically with mapping specialization in Surveying. Works are taking place in Pazderna locality, which is situated in Northern part of Southmoravian region in northeast part of the Vyškov catastral area. GNSS system methods were used for aiming topography and altimetry, more specifically by using network of permanent stations "CZEPOS". Modern GNSS method of measuring in real time (RTK) and tachymetric measure, which is classic geodetic method, were used for processing. The output of the work is a map in scale of 1 : 1 000, which should serve as a part of a plan for extending park in Smetanovy sady street in Vyškov. This map was created in Groma program, Kokeš and his extensions for altimetry, Atlas DMT.
|
|
|
Thematical map creation in locality V zrcadlech - southern part
Chalupková, Klára ; Weigel, Josef (referee) ; Kratochvíl, Radim (advisor)
The intention of the bachelor’s thesis is geodetic survey of former mining sites V zrcadlech and creation thematic map of area of interest at a scale of 1:500 and according to ČSN 01 3410 Maps of large scales. Base and thematical maps. The first part of the thesis deals with the preparation and surveying of the site. The second part deals with the office work, both data processing, as well as creation of the thematic maps. There was built survey net of auxiliary survey points on the site, which was determined by polygonal traverse and three-tripod equipment system using a total station. Connection of the traverse was carried out on horizontal control and points measured using GNSS. Points of detailed survey were measured from auxiliary survey points. The computational work was made in software Groma v. 7.0 and the graphic work was made in software MicroStation PowerDraft V8i and Atlas DMT.
|
guest ::
